the information cont ained in this dat asheet does not constitute p art of any order or contract and should not be regarded as a represent ation relating to either product s or service. w e reserve the right to alter without notice the specification or any conditions of supply for product s or service. l each product will operate over a wide volt age input range l robust st ainless steel housing l full internal potting to resist shock and vibration l sealed to ip67 l t rue bi-polar product for low volt age dc applications l other volt ages including dc options available in this range professional led indica t ors ?8.1mm mounting ? marl interna tional l td 2008 : ds 039/08 issue 2 ordering information & t ypical t echnical characteristics (t a = 25c) mean t ime between failure = 100,000 hours. luminous intensity figures refer to the unmodified discrete led. fea tures specifica tions 534 series p ack quantity = 10 pieces page 1 of 2 ^ = product s must be derated according to the derating information. each derating graph refers to specific leds. refer to p age 2. intensities (lv) and colour shades of white (x,y co-ordinates) may vary between leds withina batch. 997f-c * t ypical emission colour cool white x 0.245 0.361 0.356 0.264 y 0.229 0.385 0.351 0.220 p ar t number colour lens vol t age current luminous w a ve opera ting st orage ac/dc dc (ma) intensity length temp temp v opr lopr lv@20ma (mcd) l p (nm) t opr t stg 01-534-501-63 red colour dif fused 12-28 6-16 1 1000 643 -40 ~ +95^ -40 ~ +100 y es 01-534-521-63 y ellow colour dif fused 12-28 6-16 16000 591 -40 ~ +95^ -40 ~ +100 y es 01-534-532-63 green colour dif fused 12-28 6-16 23000 527 -40 ~ +95^ -40 ~ +100 y es 01-534-930-63 blue colour dif fused 12-28 6-16 7000 470 -40 ~ +95^ -40 ~ +100 y es 01-534-997-63 cool white colour dif fused 12-28 6-16 14000 *see below -40 ~ +95^ -40 ~ +100 y es units v ac/vdc ma mcd nm c c high intensity bs en iso 9001:2000 approved manufacturer
534 series mounting hole to be clean and burr free dimensions in mm (t ypical) not to scale ma terials push-on connect ors body s t ainless steel grade 316 nut s t ainless steel grade 316 panel seal v iton t ermination copper with silver flash finish lock w asher s t ainless steel fresnel lens polycarbonate encap sulation pc5430 resin header nylon 6 a82 technical characteristics 925-000-00 is brass tin plated.for use with 534 series lamp s. dimensions in mm (t ypical) not to scale series maximum p anel mounting minimum min/max. power cut out t orque mounting p anel dissip a tion centres thickness 534 825 8.1 0.65 x,y=14.5 1.5-13.0 units mw mm nm mm mm mounting hole dera ting informa tion 501 & 521 532, 930 & 997 the information cont ained in this dat asheet does not constitute p art of any order or contract and should not be regarded as a represent ation relating to either product s or service. w e reserve the right to alter without notice the specification or any conditions of supply for product s or service. ? marl interna tional l td 2008 : ds 039/08 issue 2 page 2 of 2 bs en iso 9001:2000 approved manufacturer
|
